Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER (except Pickup) › 2014.08–2016.08
RM25T0E _59 Vehicle Exterior _029942 EXTERIOR PANELS / TRIM _0138267 REAR BUMPER(except Pickup) A

EXTERIOR PANELS / TRIM  REAR BUMPER(except Pickup)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS


PROCEDURE

Hide 52109A 1.INSTALL REAR SIDE BUMPER SUB-ASSEMBLY LH

a.

Install the rear side bumper sub-assembly LH with the 2 nuts.


Hide 52108B 2.INSTALL REAR BUMPER SIDE EXTENSION SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52186B 3.INSTALL REAR BUMPER SIDE MOUNTING BRACKET LH

a.

Install the rear bumper side mounting bracket LH with 2 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 52185B 4.INSTALL REAR BUMPER SIDE MOUNTING BRACKET RH

HINT:

Use the same procedure described for the LH side.


Hide 52174E 5.INSTALL REAR BUMPER BAR BRACKET LH

a.

Install the rear bumper bar bracket LH with the 3 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 52173E 6.INSTALL REAR BUMPER BAR BRACKET RH

HINT:

Use the same procedure described for the LH side.


Hide 52176A 7.INSTALL REAR BUMPER ARM MOUNTING BRACKET LH (for Model Code #J76 Series)

a.

Install a new grommet.


b.

Install the rear bumper arm mounting bracket LH with screw.


Hide 52175 8.INSTALL REAR BUMPER ARM MOUNTING BRACKET (for Model Code #J76 Series)

HINT:

Use the same procedure described for the LH side.


Hide 52553 9.INSTALL REAR BUMPER FILLER LH

HINT:

When installing the rear bumper filler LH, heat the vehicle body using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)


NOTICE:

Do not heat the vehicle body excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body surface.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new rear bumper filler LH.

i.

Remove the peeling paper from the rear bumper filler LH.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



ii.

for Model Code #J76 Series:

1.

Install the rear bumper filler LH with 4 new grommets.

HINT:

Press the rear bumper filler LH firmly to install it.


2.

Install the 4 screws.



iii.

except Model Code #J76 Series:

1.

Install the rear bumper filler LH with 3 new grommets.

HINT:

Press the rear bumper filler LH firmly to install it.


2.

Install the 2 screws.

3.

Install the rear bumper arm mounting bracket LH with the 2 screws.

4.

Install a new grommet.




Hide 52552 10.INSTALL REAR BUMPER FILLER RH

HINT:

Use the same procedure described for the LH side.


Hide 52359 11.INSTALL REAR BUMPER STEP COVER LH (w/ Cover)

a.

for Model Code #J76 Series:

i.

Install the rear bumper step cover LH the 3 nuts.



b.

except Model Code #J76 Series:

i.

Install the rear bumper step cover LH the 4 nuts.



Hide 52358B 12.INSTALL REAR BUMPER STEP COVER RH (w/ Cover)

HINT:

Use the same procedure described for the LH side.


Hide 81920 13.INSTALL REFLEX REFLECTOR ASSEMBLY LH (for Model Code #J76 Series)

a.

Attach the clip and claw to install the reflex reflector assembly LH.


Hide 81910 14.INSTALL REFLEX REFLECTOR ASSEMBLY RH (for Model Code #J76 Series)

HINT:

Use the same procedure described for the LH side.


Hide 52069 15.INSTALL REAR BUMPER BAR SUB-ASSEMBLY LH

a.

w/ Cover:

i.

Install the rear bumper bar sub-assembly LH with the 3 nuts.

Torque:
41 N*m (418 kgf*cm, 363 in.*lbf)


ii.

Install the 2 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)



b.

w/o Cover:

i.

Install the rear bumper bar sub-assembly LH with the 3 nuts.

Torque:
41 N*m (418 kgf*cm, 363 in.*lbf)


ii.

Install the 2 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)



Hide 52019A 16.INSTALL REAR BUMPER BAR SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52153B 17.INSTALL REAR BUMPER EXTENSION LH

a.

for Model Code #J76 Series:

i.

Install the rear bumper extension LH with 3 nuts and bolt.

Torque:
for nut : 12 N*m (122 kgf*cm, 9 ft.*lbf)


ii.

Install 2 new grommets.


iii.

Install the 3 screws.



b.

except Model Code #J76 Series:

i.

Attach the guide to install the rear bumper extension LH.


ii.

Install the 3 nuts and bolt.

Torque:
for nut : 12 N*m (122 kgf*cm, 9 ft.*lbf)


iii.

Install the screw.



Hide 52152B 18.INSTALL REAR BUMPER EXTENSION RH

HINT:

Use the same procedure described for the LH side.


Hide 52303A 19.INSTALL REAR BUMPER STEP SUB-ASSEMBLY LH (w/ Pintle Hook)

a.
B380333C01
1.719,1.406 1.896,1.583 0.177,0.177 10 true *a 0.542,1.854 0.719,2.042 0.177,0.188 10 true *a 2.208,1.969 2.521,2.167 0.313,0.198 10 false *b 1.927,1.635 2.104,1.813 0.177,0.177 10 true *a
*a Bolt A
*b Bolt B


Install the rear bumper step sub-assembly LH with the 3 bolts.

Torque:
Bolt A : 18 N*m (184 kgf*cm, 13 ft.*lbf)


b.

Install the bolt.

Torque:
Bolt B : 12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 52302A 20.INSTALL REAR BUMPER STEP SUB-ASSEMBLY (w/ Pintle Hook)

HINT:

Use the same procedure described for the LH side.


Hide 52350 21.INSTALL REAR BUMPER STEP ASSEMBLY

a.
B380301C01
0.115,1.417 0.281,1.615 0.167,0.198 10 true *a 2.469,1.646 2.646,1.844 0.177,0.198 10 true *a 0.771,1.563 0.958,1.729 0.188,0.167 10 true *b 1.677,1.625 1.865,1.792 0.188,0.167 10 true *b
*a Bolt A
*b Bolt B


Install the rear bumper step assembly with the 2 bolts.

Torque:
Bolt A : 18 N*m (184 kgf*cm, 13 ft.*lbf)


b.

Install the 2 bolts.

Torque:
Bolt B : 12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 52566 22.INSTALL REAR BUMPER EXTENSION FILLER LH (for Model Code #J76 Series)

a.

Install the rear bumper extension filler LH with the 2 bolts.


b.

Install the 2 hole plugs.


Hide 52565 23.INSTALL REAR BUMPER EXTENSION FILLER RH (for Model Code #J76 Series)

a.

Install the rear bumper extension filler RH with the 3 bolts.


b.

Install the 3 hole plugs.


Hide 81560 24.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH (w/ Rear Combination Light)

Hide 81550 25.INSTALL REAR COMBINATION LIGHT ASSEMBLY RH (w/ Rear Combination Light)

HINT:

Use the same procedure described for the LH side.


Hide 61608B 26.INSTALL REAR WHEEL OPENING EXTENSION SUB-ASSEMBLY LH (for Model Code #J71 Series)

Hide 61607B 27.INSTALL REAR WHEEL OPENING EXTENSION SUB-ASSEMBLY RH (for Model Code #J71 Series)

HINT:

Use the same procedure described for the LH side.


Hide 76608 28.INSTALL REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY LH (w/ Mudguard)

Hide 76607 29.INSTALL REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY RH (w/ Mudguard)

HINT:

Use the same procedure described for the LH side.