The airbag sensor assembly consists of a deceleration sensor, safing sensor, drive circuit, TC and CG terminal circuit, ignition control, etc.
If the airbag sensor assembly receives signals from the deceleration sensor, it determines whether or not the SRS should be activated.
DTC B1000/31 is stored when a malfunction is detected in the airbag sensor assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B1000/31 | Center Airbag Sensor Assembly Malfunction | An airbag sensor assembly malfunction. | Airbag sensor assembly |
Check for DTCs.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR
| Proceed to |
|---|
| DTC B1000/31 is output |
| DTC B1000/31 and other DTCs are output |
If only DTC B1000/31 is output, do not clear the DTCs. Replace the airbag sensor assembly.
If any DTCs other than DTC B1000/31 are also output, troubleshoot those DTCs first.
DTC B1000/31 is output
DTC B1000/31 and other DTCs are output
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DIAGNOSTIC TROUBLE CODE CHART