Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.DISCONNECT REAR COMBINATION LIGHT ASSEMBLY LH
81550D 2.REMOVE REAR COMBINATION LIGHT BULB
| *1 | Base Point |
| *2 | Unlock Position Mark |
|
Counterclockwise |
Turn the bulb socket counterclockwise until the base point is aligned with the unlock position mark to disconnect the bulb socket from the rear combination light lens LH.
|
Push |
|
Counterclockwise |
Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.
81550D 3.INSTALL REAR COMBINATION LIGHT BULB
| *1 | Protrusion |
|
Cutout |
Align the 2 protrusions on the side turn signal light bulb with the 2 cutouts of the bulb socket and insert the bulb to the bulb socket.
|
Push |
|
Clockwise |
While pushing the side turn signal light bulb, turn the bulb clockwise to install the bulb.
| *1 | Base Point |
| *2 | Unlock Position Mark |
Align the base point of the bulb socket to the unlock position mark.
Rotate the bulb socket clockwise until the lock to connect it to the rear combination light lens LH.
4.CONNECT REAR COMBINATION LIGHT ASSEMBLY LH