Home › Vehicle Exterior › WIPER / WASHER › WIPER LOCK SWITCH
RM25T0E _59 Vehicle Exterior _029939 WIPER / WASHER _0138730 WIPER LOCK SWITCH A

WIPER / WASHER  WIPER LOCK SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.


·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 55409F 1.REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

Hide 55446A 2.REMOVE NO. 1 SWITCH HOLE BASE

Hide 61203 4.REMOVE ROOF SIDE RAIL SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 84290 5.REMOVE LIMIT SWITCH ASSEMBLY

a.
B378962C01
1.104,1.115 1.438,1.594 true 1.51,1.521 1.823,1.677 0.313,0.156 10 false *1
*1 wiper arm retaining screw


Loosen the wiper arm retaining screw while pulling the wiper arm frontward.

HINT:

Use the same procedure for both wiper arms.



b.

Fold the wiper arm frontward.

HINT:

Use the same procedure for both wiper arms.



c.
B383358C01
1.427,0.417 1.385,0.229 1.385,0.229 1.26,0.229 false 1.021,0.438 0.979,0.25 0.979,0.25 0.854,0.25 false 1.073,0.125 1.385,0.281 0.313,0.156 10 false *1 0.635,0.177 0.948,0.333 0.313,0.156 10 false *2
*1 bolt
*2 bracket


Remove the 2 bolts and 2 brackets from the windshield frame retaining holders on the hood.


d.
B383359

Remove the 2 bolts and fold the windshield frame frontward.


e.
B383360

Lock the windshield frame with the 2 bolts and 2 brackets of the retaining holders.


f.
B378961

Disconnect the limit switch assembly connector.


g.
B378959

Remove the limit switch assembly as shown in the illustration.