Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84290 1.INSTALL LIMIT SWITCH ASSEMBLY
Install the limit switch assembly.
Connect the limit switch assembly connector.
Remove the 2 bolts and 2 brackets from the retaining holders and unlock the windshield frame.
Raise the windshield frame and install the 2 bolts.
Install the 2 bolts and 2 brackets to the windshield frame retaining holders on the hood.
Raise the wiper arm.
Use the same procedure for both wiper arms.
Push the wiper arm backward and tighten the wiper arm retaining screw.
Use the same procedure for both wiper arms.
61232 2.INSTALL ROOF SIDE RAIL SUB-ASSEMBLY LH
61203 3.INSTALL ROOF SIDE RAIL SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
55446A 4.INSTALL NO. 1 SWITCH HOLE BASE
55409F 5.INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY