Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY(for Canvas Top)
RM25T0E _59 Vehicle Exterior _029940 LIGHTING (EXT) _0138217 LICENSE PLATE LIGHT ASSEMBLY(for Canvas Top) A

LIGHTING (EXT)  LICENSE PLATE LIGHT ASSEMBLY(for Canvas Top)  INSTALLATION  


PROCEDURE

Hide 81270 1.INSTALL LICENSE PLATE LIGHT ASSEMBLY (for Back Door)

a.

Pass the wire harness through the back door and connect the grommet.


b.

Install the license plate light assembly with the 3 nuts.

Torque:
3.2 N*m (33 kgf*cm, 28 in.*lbf)


c.

Connect the connector.


Hide 81270 2.INSTALL LICENSE PLATE LIGHT ASSEMBLY (w/ Auxiliary Fuel Tank)

a.

Install the bulb socket of the license plate light assembly with the 2 nuts.

HINT:

Use the same procedure to install the bulb socket of the license plate light assembly on the other side.



b.

Attach the 2 wire harness clamps.


c.

Pass the wire harness through the back door and connect the grommet.


d.

Connect the connector.


Hide 81690 3.INSTALL LICENSE PLATE LIGHT COVER SUB-ASSEMBLY (w/ Auxiliary Fuel Tank)

a.

Install the license plate light cover sub-assembly with the 2 screws.

HINT:

Use the same procedure to install the license plate light cover sub-assembly on the other side.



Hide 67848 4.INSTALL BACK DOOR SERVICE HOLE COVER LH

Hide 64790C 5.INSTALL BACK DOOR TRIM PANEL ASSEMBLY LH

Hide 69291 6.INSTALL BACK DOOR INSIDE HANDLE ASSEMBLY