Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR (for Front LH Side)
RM25T0E _59 Vehicle Exterior _029939 WIPER / WASHER _0138080 WASHER MOTOR(for Front LH Side) A

WIPER / WASHER  WASHER MOTOR(for Front LH Side)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).


PROCEDURE

Hide 85310 1.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.
B383391C01
2.615,0.958 2.979,0.813 true 2.156,1.021 2.302,1.021 false 2.938,1.021 3.083,1.021 false 3.01,0.698 3.25,0.906 0.24,0.208 10 true *a 1.99,0.938 2.302,1.094 0.313,0.156 10 false *b 3.115,0.948 3.427,1.104 0.313,0.156 10 false *b
*a Protrusion
*b Marking


Install the windshield washer motor and pump assembly to the packing of the windshield washer jar assembly.

NOTICE:

Make sure that the protrusion of the windshield washer motor and pump assembly is between the 2 markings.



Hide 85330 2.INSTALL WINDSHIELD WASHER JAR ASSEMBLY

a.

Install the windshield washer jar assembly with the 3 bolts.


b.

Connect the connector.


Hide 3.FILL UP WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID

a.

Connect the washer hose to the windshield washer motor and pump assembly, and fill the washer jar with washer fluid.


Hide 74403A 4.INSTALL BATTERY CARRIER SUB-ASSEMBLY

a.
E147685E02
1.49,0.24 1.646,0.427 0.156,0.188 10 true A 1.427,0.938 1.583,1.125 0.156,0.188 10 true B 1.917,0.833 2.073,1.021 0.156,0.188 10 true B 2.083,1.51 2.24,1.698 0.156,0.188 10 true B 2.313,0.656 2.5,0.844 0.188,0.188 10 true A

Install the battery carrier sub-assembly with the 5 bolts.

Torque:
for bolt A : 12.5 N*m (127 kgf*cm, 9 ft.*lbf)
for bolt B : 8.0 N*m (82 kgf*cm, 71 in.*lbf)