Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR (for Rear)
RM25T0E _59 Vehicle Exterior _029939 WIPER / WASHER _0138368 WASHER MOTOR(for Rear) A

WIPER / WASHER  WASHER MOTOR(for Rear)  INSTALLATION  


PROCEDURE

Hide 85316R 1.INSTALL REAR WASHER MOTOR SUPPORT (for Model Code #J71 Series)

a.

Attach the 2 claws and install the rear washer motor support to the rear washer motor assembly.


Hide 85310R 2.INSTALL REAR WASHER MOTOR ASSEMBLY (for Model Code #J71 Series)

a.

Install the rear washer motor assembly to the rear washer jar assembly.


b.

Install the bolt and nut.

Torque:
3.4 N*m (35 kgf*cm, 30 in.*lbf)


Hide 85330R 3.INSTALL REAR WASHER JAR ASSEMBLY (for Model Code #J71 Series)

a.

Install the rear washer jar assembly with the 2 bolts.

Torque:
3.4 N*m (35 kgf*cm, 30 in.*lbf)


b.

Connect the connector.


Hide 4.FILL UP REAR WASHER JAR ASSEMBLY WITH WASHER FLUID (for Model Code #J71 Series)

a.

Connect the rear washer hose to the rear washer motor assembly, and fill the washer jar with washer fluid.


Hide 62903 5.INSTALL QUARTER VENTILATOR DUCT SUB-ASSEMBLY RH (for Model Code #J71 Series)

a.

Install the quarter ventilator duct sub-assembly RH with the 4 nuts.


Hide 62511 6.INSTALL QUARTER INSIDE TRIM BOARD RH (for Model Code #J71 Series)

Hide 73298 7.INSTALL NO. 2 QUARTER TRIM BELT HOLE COVER RH (for Model Code #J71 Series)

Hide 73297B 8.INSTALL QUARTER TRIM BELT HOLE COVER RH (for Model Code #J71 Series)

Hide 9.INSTALL REAR NO. 2 SEAT ASSEMBLY (for Model Code #J71 Series, w/ REAR NO. 2 SEAT ASSEMBLY)

Hide 85326 10.INSTALL WASHER PACKING (for Model Code #J76 Series)

a.

Install the 2 washer packings to the rear washer jar assembly.


Hide 85310R 11.INSTALL REAR WASHER MOTOR ASSEMBLY (for Model Code #J76 Series)

a.
B383404

Install the rear washer motor assembly with the clip.


b.
B378954

Attach the 2 clips.


Hide 85330R 12.INSTALL REAR WASHER JAR ASSEMBLY (for Model Code #J76 Series)

a.

Attach the 2 claws and install the rear washer jar assembly.


b.

Connect the connector.


Hide 13.FILL UP REAR WASHER JAR ASSEMBLY WITH WASHER FLUID (for Model Code #J76 Series)

a.

Connect the rear washer hose to the rear washer motor assembly, and fill the washer jar with washer fluid.


Hide 62511 14.INSTALL QUARTER INSIDE TRIM BOARD RH (for Model Code #J76 Series)

Hide 62551F 15.INSTALL REAR SEAT SIDE GARNISH RH (for Model Code #J76 Series)

Hide 67917A 16.INSTALL REAR DOOR SCUFF PLATE RH (for Model Code #J76 Series)

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Semi-long Body)>INSTALLATION


Hide 17.INSTALL REAR NO. 2 SEAT ASSEMBLY (for Model Code #J76 Series, w/ REAR NO. 2 SEAT ASSEMBLY)

Hide 85316R 18.INSTALL REAR WASHER MOTOR SUPPORT (for Model Code #J78 Series)

a.

Attach the 2 claws and install the rear washer motor support to the rear washer motor assembly.


Hide 85310R 19.INSTALL REAR WASHER MOTOR ASSEMBLY (for Model Code #J78 Series)

a.

Install the rear washer motor assembly to the rear washer jar assembly.


Hide 85360R 20.INSTALL REAR WASHER BRACKET ASSEMBLY (for Model Code #J78 Series)

a.

Install the rear washer bracket assembly with the bolt and nut, to the rear washer jar assembly.

Torque:
3.4 N*m (35 kgf*cm, 30 in.*lbf)


Hide 85330R 21.INSTALL REAR WASHER JAR ASSEMBLY (for Model Code #J78 Series)

a.

Install the rear washer jar assembly with the 2 bolts.

Torque:
3.4 N*m (35 kgf*cm, 30 in.*lbf)


b.

Connect the connector.


Hide 22.FILL UP REAR WASHER JAR ASSEMBLY WITH WASHER FLUID (for Model Code #J78 Series)

a.

Connect the rear washer hose to the rear washer motor assembly, and fill the washer jar with washer fluid.


Hide 62630P 23.INSTALL REAR QUARTER TRIM PANEL ASSEMBLY RH (for Model Code #J78 Series)

a.

Install the rear quarter trim panel assembly RH with the 10 clips.


Hide 58706 24.INSTALL JACK HANDLE BRACKET SUB-ASSEMBLY (for Model Code #J78 Series)

a.

Install the jack handle bracket sub-assembly with the 2 bolts.


Hide 09114 25.INSTALL JACK HANDLE EXTENSION SUB-ASSEMBLY (for Model Code #J78 Series)

a.

Install the jack handle extension sub-assembly.


Hide 09115 26.INSTALL JACK HANDLE ROD SUB-ASSEMBLY (for Model Code #J78 Series)

a.

Install the jack handle rod sub-assembly.


Hide 27.INSTALL REAR NO. 2 SEAT ASSEMBLY (for Model Code #J78 Series, w/ REAR NO. 2 SEAT ASSEMBLY)