A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
85940B 1.INSTALL REAR WIPER RELAY ASSEMBLY (for Model Code #J71 Series)
Install the rear wiper relay assembly with the bolt.
Connect the connector.
62511 2.INSTALL QUARTER INSIDE TRIM BOARD RH (for Model Code #J71 Series)
73298 3.INSTALL NO. 2 QUARTER TRIM BELT HOLE COVER RH (for Model Code #J71 Series)
73297B 4.INSTALL QUARTER TRIM BELT HOLE COVER RH (for Model Code #J71 Series)
5.INSTALL REAR NO. 2 SEAT ASSEMBLY (for Model Code #J71 Series, w/ REAR NO. 2 SEAT ASSEMBLY)
85940B 6.INSTALL REAR WIPER RELAY ASSEMBLY (for Model Code #J76 Series)
Install the rear wiper relay assembly with the bolt.
Connect the connector.
62511 7.INSTALL QUARTER INSIDE TRIM BOARD RH (for Model Code #J76 Series)
62551F 8.INSTALL REAR SEAT SIDE GARNISH RH (for Model Code #J76 Series)
67917A 9.INSTALL REAR DOOR SCUFF PLATE RH (for Model Code #J76 Series)
Use the same procedure described for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Semi-long Body)>INSTALLATION
10.INSTALL REAR NO. 2 SEAT ASSEMBLY (for Model Code #J76 Series, w/ REAR NO. 2 SEAT ASSEMBLY)
85940B 11.INSTALL REAR WIPER RELAY ASSEMBLY (for Model Code #J78 Series)
Install the rear wiper relay assembly with the bolt.
Connect the connector.
62630P 12.INSTALL REAR QUARTER TRIM PANEL ASSEMBLY RH (for Model Code #J78 Series)
Install the rear quarter trim panel assembly RH with the 10 clips.
58706 13.INSTALL JACK HANDLE BRACKET SUB-ASSEMBLY (for Model Code #J78 Series)
Install the jack handle bracket sub-assembly with the 2 bolts.
09114 14.INSTALL JACK HANDLE EXTENSION SUB-ASSEMBLY (for Model Code #J78 Series)
Install the jack handle extension sub-assembly.
09115 15.INSTALL JACK HANDLE ROD SUB-ASSEMBLY (for Model Code #J78 Series)
Install the jack handle rod sub-assembly.
16.INSTALL REAR NO. 2 SEAT ASSEMBLY (for Model Code #J78 Series, w/ REAR NO. 2 SEAT ASSEMBLY)