for Sub-cool Accelerator:
When removing the cooler expansion valve, be sure to replace the installation bolts of the cooler expansion valve and the air conditioner tube and accessory assembly with new bolts.
except Sub-cool Accelerator:
When removing the cooler expansion valve, be sure to replace the installation bolts of the cooler expansion valve and the No. 1 cooler refrigerant suction hose and cooler refrigerant liquid pipe C with new bolts.
88515 1.INSTALL COOLER EXPANSION VALVE
Apply sufficient compressor oil to 2 new O-rings and the fitting surfaces of the new cooler expansion valve.
ND-OIL 8 or equivalent
Install the 2 O-rings.
Keep the O-rings and O-ring fitting surfaces free of foreign matter.
Temporarily install the cooler expansion valve.
Using a 4 mm hexagon wrench, install the cooler expansion valve with the 2 hexagon bolts.
88716C 2.INSTALL COOLER REFRIGERANT LIQUID PIPE C (except Sub-cool Accelerator)
88712 3.INSTALL NO. 1 COOLER REFRIGERANT SUCTION HOSE (except Sub-cool Accelerator)
Remove the vinyl tape from the No. 1 cooler refrigerant suction hose.
Sufficiently apply compressor oil to new O-rings and fitting surface of the No. 1 cooler refrigerant suction hose.
ND-OIL 8 or equivalent
Install the O-ring to the No. 1 cooler refrigerant suction hose.
Keep the O-rings and O-ring fitting surfaces free of foreign matter.
Connect the No. 1 cooler refrigerant suction hose.
Rotate the hook connector in the direction indicated by the arrow in the illustration and install a new bolt.
88710E 4.CONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY (for Sub-cool Accelerator)
Remove the vinyl tape from the air conditioner tube and accessory assembly.
Apply sufficient compressor oil to 2 new O-rings and the fitting surfaces of the cooler expansion valve.
ND-OIL 8 or equivalent
Install the O-ring.
Keep the O-rings and O-ring fitting surfaces free of foreign matter.
Connect the air conditioner tube and accessory assembly.
Rotate the hook connector in the direction indicated by the arrow in the illustration and install the bolt.
5. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT
6. WARM UP ENGINE
7.INSPECT FOR REFRIGERANT LEAK