Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
84233 1.INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
Connect the connector.
Install the front door courtesy light switch assembly with the bolt.
62412 2.INSTALL CENTER PILLAR GARNISH LH
58707A 3.INSTALL JACK HOLDER SUB-ASSEMBLY
73174 4.INSTALL FRONT SEAT BELT HOLE COVER LH