Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
84233 1.INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
Connect the connector.
Install the front door courtesy light switch assembly with the bolt.
62414A 2.INSTALL LOWER CENTER PILLAR GARNISH LH
67918A 3.INSTALL REAR DOOR SCUFF PLATE LH
67914 4.INSTALL FRONT DOOR SCUFF PLATE LH