Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
84234 1.INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY
for LH Side:
Connect the connector.
for RH Side:
Connect the connector.
Install the rear door courtesy light switch assembly with the bolt.
62640P 2.INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH
62630P 3.INSTALL REAR QUARTER TRIM PANEL ASSEMBLY RH (for RH Side)
64707D 4.INSTALL QUARTER TRIM JACK COVER SUB-ASSEMBLY
62552F 5.INSTALL REAR SEAT SIDE GARNISH LH
67918A 6.INSTALL REAR DOOR SCUFF PLATE LH