Home › Vehicle Interior › LIGHTING (INT) › BACK DOOR COURTESY SWITCH
RM25T0E _58 Vehicle Interior _029926 LIGHTING (INT) _0141626 BACK DOOR COURTESY SWITCH A

LIGHTING (INT)  BACK DOOR COURTESY SWITCH  INSTALLATION  


PROCEDURE

Hide 69350 1.INSTALL BACK DOOR LOCK ASSEMBLY (BACK DOOR COURTESY SWITCH)

a.

Apply MP grease to the sliding parts of the back door lock assembly (back door courtesy switch).


b.

Using a T30 "TORX" socket wrench, install the back door lock assembly (back door courtesy switch) with the 3 screws.


c.

Connect the connectors and attach the clamp.


d.

Connect the rods and attach the snaps.

E303185C04
1.156,0.375 1.365,0.521 0.208,0.146 10 true *4 4.156,1.833 4.375,1.99 0.219,0.156 10 true *2 3.781,2.375 4,2.531 0.219,0.156 10 true *3 1.313,1.573 1.51,1.729 0.198,0.156 10 true *1 4.198,2.125 4.417,2.281 0.219,0.156 10 true *2 0.49,1.979 0.688,2.135 0.198,0.156 10 true *1 1.354,2.344 1.552,2.5 0.198,0.156 10 true *1 6.198,0.979 6.406,1.125 0.208,0.146 10 true *4 5.156,1.729 5.365,1.875 0.208,0.146 10 true *4
*1 Screw *2 Connector
*3 Clamp *4 Snap



Hide 67848 2.INSTALL BACK DOOR SERVICE HOLE COVER LH

Hide 64790C 3.INSTALL BACK DOOR TRIM PANEL ASSEMBLY LH

Hide 69291 4.INSTALL BACK DOOR INSIDE HANDLE ASSEMBLY