Home › Drivetrain › BF1B (TRANSFER / 4WD / AWD) › TRANSFER CONTROL SOLENOID
RM25T0E _52 Drivetrain _030709 BF1B TRANSFER / 4WD / AWD _0142890 TRANSFER CONTROL SOLENOID A

BF1B TRANSFER / 4WD / AWD  TRANSFER CONTROL SOLENOID  INSTALLATION  


PROCEDURE

Hide 85440A 1.INSTALL FOUR WHEEL DRIVE CONTROL SOLENOID ASSEMBLY

NOTICE:

If the four wheel drive control solenoid assembly is dropped or subjected to a strong impact, replace it with a new one.


a.
C311910

Connect the 4 front drive shift vacuum hoses to the four wheel drive control solenoid assembly.

Hose Insert Length:

9.7 to 10.0 mm (0.3819 to 0.3937 in.)


NOTICE:

Make sure the front drive shift vacuum hoses are connected to the correct locations.



b.

Attach the guide to temporarily install the four wheel drive control solenoid assembly.


c.

Install the bolt.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


d.

Connect the 2 connectors to the four wheel drive control solenoid assembly.


Hide 44510 2.INSTALL BRAKE ACTUATOR ASSEMBLY (w/ ABS)