Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › REAR SPEED SENSOR (w/ VSC) › from 2016.08
RM25T0E _54 Brake _029873 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0282732 REAR SPEED SENSOR(w/ VSC) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  REAR SPEED SENSOR(w/ VSC)  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Type A, type B or type C skid control sensor wire is used.Since type A and type B skid control sensor wires are no longer available as supply parts, type C skid control sensor wires and the compatible bolts must be used when replacing the skid control sensor wires.

C450701C01
4.615,3.521 4.948,3.521 false 1.333,0.5 1.833,0.75 0.5,0.25 10 false *A 1.583,0.5 1.917,0.75 0.333,0.25 10 false *B 4.333,0.5 4.667,0.75 0.333,0.25 10 false *C 5,3.458 5.25,3.708 0.25,0.25 10 false *1
*A Type A *B Type B
*C Type C - -
*1 Bolt - -


Skid Control Sensor Wire Skid Control Sensor Wire Part Number Bolt Part Number
Type A 89516-60500 91671-80818
Type B 89516-60610 91671-80818
Type C 89516-60611 91674-80822


PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 47316A 2.REMOVE REAR FLEXIBLE HOSE

Hide 89516B 3.REMOVE SKID CONTROL SENSOR WIRE

a.

Disconnect the 3 sensor connectors.

C362176


b.

Remove the 5 bolts and 5 harness clamps.


c.

Remove the skid control sensor wire.


Hide 89546 4.REMOVE REAR SPEED SENSOR LH

a.
C267657

Remove the bolt and rear speed sensor LH.


Hide 89545 5.REMOVE REAR SPEED SENSOR RH

HINT:

Use the same procedure described for the LH side.