Home › Engine / Hybrid System › 1HZ (FUEL) › FUEL TANK(for 130 L Tank) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029893 1HZ FUEL _0136498 FUEL TANK(for 130 L Tank) A

1HZ FUEL  FUEL TANK(for 130 L Tank)  REMOVAL  


PROCEDURE

Hide 1.DRAIN FUEL

Hide 2.DISCONNECT FUEL RETURN HOSE

a.
A386802

Slide the clip and disconnect the fuel return hose from the fuel suction tube assembly.


Hide 3.DISCONNECT FUEL MAIN HOSE

a.
A386803

Slide the clip and disconnect the fuel main hose from the fuel suction tube assembly.


Hide 77213 4.DISCONNECT INLET FUEL HOSE

a.
A284618

Slide the clamp and disconnect the inlet fuel hose from the lower fuel tank filler pipe sub-assembly.


Hide 77100D 5.DISCONNECT FUEL BREATHER HOSE

a.
A289093

Slide the clamp and disconnect the fuel breather hose from the fuel tank assembly.


Hide 77100 6.REMOVE FUEL TANK ASSEMBLY

a.
A290419

Disconnect the fuel sender gauge connector.


b.
A290422

Detach the wire harness clamp from the frame.


c.

Set an engine lifter underneath the fuel tank assembly.


d.
A284620

Remove the 2 bolts, 2 pins and 2 fuel tank bands.


e.

Slightly lower the engine lifter.


f.

Remove the No. 1 fuel tank protector sub-assembly.


Hide 8.REMOVE FUEL SUCTION TUBE ASSEMBLY

A386804

a.

Remove the nut.


b.

Remove the 7 screws and fuel suction tube assembly.


c.

Remove the gasket from the fuel suction tube assembly.


Hide 77278A 9.DISCONNECT FUEL EVAPORATION HOSE

a.
A284621

Detach the clamp from the fuel tank assembly.


b.

Slide the clamp and remove the fuel evaporation hose from the fuel tank assembly.


Hide 77011 10.REMOVE LOWER FUEL TANK FILLER PIPE SUB-ASSEMBLY

a.
A289045

Remove the 6 screws and lower fuel tank filler pipe sub-assembly from the fuel tank assembly.


b.

Remove the gasket from the lower fuel tank filler pipe sub-assembly.