Home › Engine / Hybrid System › 1HZ (FUEL) › FUEL SENDER GAUGE ASSEMBLY(for 130 L Tank) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029893 1HZ FUEL _0136505 FUEL SENDER GAUGE ASSEMBLY(for 130 L Tank) A

1HZ FUEL  FUEL SENDER GAUGE ASSEMBLY(for 130 L Tank)  REMOVAL  


PROCEDURE

Hide 58325E 1.REMOVE REAR FLOOR SERVICE HOLE COVER (for Model Code #J76 Series)

a.

Remove the 2 screws and rear floor service hole cover.


Hide 77100 2.REMOVE FUEL TANK ASSEMBLY (for Model Code #J79 Series)

Hide 83320 3.REMOVE FUEL SENDER GAUGE ASSEMBLY

NOTICE:

If an fuel sender gauge assembly is removed from the fuel tank assembly, replace the fuel sender gauge assembly with a new one.


a.
A290420

for Model Code #J76 Series:

Disconnect the fuel sender gauge connector.


b.
A290422

for Model Code #J76 Series:

Detach the wire harness clamp from the frame.


c.
A388256

Detach the wire harness clamp from the fuel tank assembly.


d.

Remove the 5 screws and fuel sender gauge assembly.