Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the RH side.
72211 1.INSTALL SEAT TRACK ADJUSTING HANDLE
Attach the 2 springs to install the seat track adjusting handle.
71537C 2.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH
| *a | Hook |
| *b | Guide |
Move the protector in the direction of the arrow to attach the guide and hook.
Install the front seat cushion edge protector RH with the screw.
71538B 3.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH
Use the same procedure described for the RH side.
71071S 4.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER
Set the separate type front seat cushion cover to the separate type front seat cushion pad.
Using hog ring pliers, install the separate type front seat cushion cover with 18 new hog rings.
| *a | Hog Ring Pliers | *b | Cutout |
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
Install the hog rings at the cutouts if they are there.
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 2 new hog rings.
| *a | Hog Ring Pliers | - | - |
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
5.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
for Front Passenger Side:
Attach the claw to connect the connector of the occupant detection sensor.
Attach the 12 hooks to install the separate type front seat cushion cover with pad.
79977 6.INSTALL SEATBACK FELT
Install the seatback felt to the front seatback spring assembly RH.
71551S 7.INSTALL SEPARATE TYPE FRONT SEATBACK PAD
Install the separate type front seatback pad to the front seatback spring assembly RH.
71073S 8.INSTALL SEPARATE TYPE FRONT SEATBACK COVER
Set the separate type front seatback cover to the separate type front seatback pad.
Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 8 new hog rings.
| *a | Hog Ring Pliers | *b | Cutout |
Be careful not to damage the separate type front seatback cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
Install the hog rings at the cutouts if they are there.
71931 9.INSTALL FRONT SEAT HEADREST SUPPORT
Attach the 4 claws to install the 2 front seat headrest supports.
Using hog ring pliers, connect the strap of the separate type front seatback cover with 3 new hog rings.
| *a | Hog Ring Pliers | - | - |
Using hog ring pliers, install 5 new hog rings.
| *a | Hog Ring Pliers | *b | Cutout |
Be careful not to damage the separate type front seatback cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
Install the hog rings at the cutouts if they are there.
71875A 10.INSTALL RECLINING ADJUSTER INSIDE COVER RH
Temporarily install the reclining adjuster inside cover RH.
Attach the guide to install the reclining adjuster inside cover RH.
71876 11.INSTALL RECLINING ADJUSTER INSIDE COVER LH
Use the same procedure described for the RH side.
12.INSTALL FRONT SEATBACK ASSEMBLY RH
| *A | LH Side |
| *B | RH Side |
Attach the 4 guides and install the front seatback assembly RH with the 4 bolts.
Attach the 2 hooks.
73230 13.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
73240 14.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
71861 15.INSTALL FRONT SEAT INNER CUSHION SHIELD RH
Attach the 2 claws and 2 guides.
Attach the 2 claws and 4 guides to install the front seat inner cushion shield RH.
71811D 16.INSTALL FRONT SEAT CUSHION SHIELD RH
Attach the claw and 2 guides.
Attach the 2 claws and 4 guides.
Attach the claw and clip.
Install the front seat cushion shield RH with the screw.
Attach the band.
72525A 17.INSTALL RECLINING ADJUSTER RELEASE HANDLE RH
Attach the claw to install the reclining adjuster release handle RH.