Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY(for Separate Seat Type with Inner Belt Attached) › from 2016.08
RM25T0E _58 Vehicle Interior _029931 SEAT BELT _0290011 FRONT SEAT INNER BELT ASSEMBLY(for Separate Seat Type with Inner Belt Attached) A

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for Separate Seat Type with Inner Belt Attached)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves. Sharp areas on the parts may injure your hands.



HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the RH side.



PROCEDURE

Hide 73230 1.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH

a.
B457963

Install the front seat belt anchor plate to the front seat cushion spring assembly RH.


b.
B457951C01
1.854,1.771 2.979,1.865 2.979,1.865 2.167,1.604 true 3.021,1.76 3.333,1.917 0.313,0.156 10 false *a
*a Protruding Part


Install the front seat inner belt assembly RH with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat cushion spring.



c.
B457966

Attach the 2 clamps to connect the wire harness.


d.

Attach the claw to connect the connector.


e.
B457961

Return the separate type front seat cushion cover to its original position and install the clip.


Hide 73240 2.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

a.
B457965

Install the front seat belt anchor plate to the front seat cushion spring assembly LH.


b.
B457952C01
1.385,1.771 0.271,1.813 0.271,1.813 1.063,1.604 true 0.063,1.708 0.375,1.865 0.313,0.156 10 false *a
*a Protruding Part


Install the front seat inner belt assembly LH with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat cushion spring.



c.
B456585

Attach the 3 clamps to connect the wire harness.


d.

Attach the claw to connect the connector.


e.

Connect the connector of the occupant detection sensor.


f.
B457960

Return the separate type front seat cushion cover to its original position and install the clip.


Hide 71861 3.INSTALL FRONT SEAT INNER CUSHION SHIELD RH

a.
B452677

Attach the 2 claws and 2 guides.


b.
B452675

Attach the 2 claws and 4 guides to install the front seat inner cushion shield RH.


c.
B452678

Attach the band.