Home › Engine / Hybrid System › 1VD-FTV (INTAKE / EXHAUST) › EXHAUST PIPE (for 5 Door) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029894 1VD-FTV INTAKE / EXHAUST _0136511 EXHAUST PIPE(for 5 Door) A

1VD-FTV INTAKE / EXHAUST  EXHAUST PIPE(for 5 Door)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves when removing the exhaust pipe.

·

The exhaust pipe is extremely hot immediately after the engine has stopped.

·

Confirm that the exhaust pipe has cooled down before removing it.



PROCEDURE

Hide 17430 1.REMOVE TAILPIPE ASSEMBLY

a.

Remove the 2 bolts and 2 nuts.


b.

Remove the 4 nuts from the 2 exhaust pipe support cushions. Then remove the tailpipe assembly.

A162133


c.
A168459

Remove the 4 nuts and 2 exhaust pipe support cushions from the tailpipe assembly.


d.

Remove the gasket from the front No. 2 exhaust pipe sub-assembly.


Hide 17410 2.REMOVE FRONT EXHAUST PIPE ASSEMBLY (w/o DPF)

a.

Remove the 2 bolts and 2 compression springs.


b.

Remove the 2 nuts from the exhaust pipe support cushion. Then remove the front exhaust pipe assembly.

A162134


c.

Remove the 2 nuts and exhaust pipe support cushion from the front exhaust pipe assembly.


Hide 18421C 3.REMOVE CENTER CONVERTER PROTECTOR STAY (w/o DPF)

a.
A166656

Remove the 3 bolts and center converter protector stay.


Hide 18450A 4.REMOVE MONOLITHIC CONVERTER ASSEMBLY (w/o DPF)

a.
A164686

Remove the 3 nuts, monolithic converter assembly and gasket.


b.
A162139

Remove the gasket from the monolithic converter assembly.


Hide 18431 5.REMOVE UPPER CATALYTIC CONVERTER INSULATOR (w/o DPF)

a.
A166040

Remove the 2 bolts, nut and upper catalytic converter insulator.


Hide 89467B 6.REMOVE AIR FUEL RATIO SENSOR (w/ DPF)

Hide 17402 7.REMOVE FRONT NO. 2 EXHAUST PIPE SUB-ASSEMBLY (w/ DPF)

a.

Remove the 2 bolts and 2 compression springs.


b.

Remove the 2 nuts from the exhaust pipe support cushion. Then remove the front No. 2 exhaust pipe sub-assembly.

A392045


c.

Remove the 2 nuts and exhaust pipe support cushion from the front No. 2 exhaust pipe sub-assembly.


Hide 89425 8.REMOVE EXHAUST GAS TEMPERATURE SENSOR (w/ DPF)

Hide 89425A 9.REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR (w/ DPF)

Hide 89425B 10.REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR (w/ DPF)

Hide 17410 11.REMOVE FRONT EXHAUST PIPE ASSEMBLY (w/ DPF)

a.
A391801

Disconnect the 2 air hoses front exhaust pipe assembly.


b.
A391800

Remove the 4 bolts from the No. 1 exhaust pipe support.


c.
A391802

Remove the 2 bolts from the No. 2 frame crossmember sub-assembly.


d.
A391805

Remove the 3 nuts, front exhaust pipe assembly and gasket.


e.

Remove the gasket from the front exhaust pipe assembly.