Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029770 1VD-FTV FUEL _0135409 FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type) A

1VD-FTV FUEL  FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FUEL SENDER GAUGE ASSEMBLY

NOTICE:

If an fuel sender gauge assembly is removed from the fuel sub tank, replace the fuel sender gauge assembly with a new one.


a.

Install a new fuel sender gauge assembly with the 5 screws.

Torque:
1.5 N*m (15 kgf*cm, 13 in.*lbf)