Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL SUPPLY PUMP (w/ DPF) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029770 1VD-FTV FUEL _0290475 FUEL SUPPLY PUMP(w/ DPF) G

1VD-FTV FUEL  FUEL SUPPLY PUMP(w/ DPF)  INSPECTION  


PROCEDURE

Hide 22100 1.INSPECT FUEL SUPPLY PUMP

a.

Inspect the suction control valve.

i.
A392184C01
2.188,1.51 2.906,1.229 true 2.125,1.385 2.917,0.906 true 2.5,1.542 2.823,1.781 true 2.854,1.76 3.167,1.917 0.313,0.156 10 false *1 0.094,0.052 0.406,0.208 0.313,0.156 10 false *a 2.938,0.792 3.094,0.99 0.156,0.198 10 false 1 2.958,1.115 3.115,1.313 0.156,0.198 10 false 2
*1 Suction Control Valve
*a Component without harness connected
(Fuel Supply Pump Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 1.9 to 2.3 Ω


If the result is not as specified, replace the fuel supply pump assembly.



Hide 2.INSPECT FUEL TEMPERATURE SENSOR

a.

Inspect the fuel temperature sensor (See page Engine / Hybrid System>1VD-FTV (FUEL)>FUEL TEMPERATURE SENSOR>INSPECTION).

If the result is not as specified, replace the fuel temperature sensor.