Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL SYSTEM(w/ DPF) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029770 1VD-FTV FUEL _0290473 FUEL SYSTEM(w/ DPF) L

1VD-FTV FUEL  FUEL SYSTEM(w/ DPF)  PRECAUTION  


FUEL SYSTEM


a.

Observe these precautions when disconnecting the fuel tube connector (for quick type A).

i.
A157617C10
0.771,1.167 1.083,1.323 0.313,0.156 10 false *a
*a Pull


Detach the lock claw by lifting up the cover as shown in the illustration.


ii.

Check for dirt or mud on the pipe and around the connector before disconnection. Clean if necessary.


iii.
A088336C17
1.021,0.417 1.333,0.573 0.313,0.156 10 false *a 0.76,1.979 1.073,2.135 0.313,0.156 10 false *b 1.74,1.719 2.052,1.875 0.313,0.156 10 false *a
*a Pinch
*b Pull


Pinch the connector and disconnect the connector and pipe.

If the connector and pipe are stuck together, pinch the connector, and push and pull the pipe to disconnect the pipe and pull it out.

NOTICE:

Do not use any tools in this procedure.



iv.

Check for dirt or mud on the seal surface of the disconnected pipe. Clean if necessary.


v.
A099427C01
1.896,0.813 1.719,0.333 true 1.615,0.156 1.927,0.313 0.313,0.156 10 false *a
*a Plastic Bag


To protect the disconnected pipe and connector from damage and contamination, cover it with a plastic bag.



b.

Observe these precautions when disconnecting the fuel tube connector (for quick type B).

i.

Check for dirt or mud on the injector and around the connector before disconnection. Clean if necessary.


ii.
A203843C02
0.406,1.125 0.271,0.635 false 0.167,0.458 0.479,0.615 0.313,0.156 10 false *a
*a Retainer


Detach the hook of the fuel tube connector retainer, open the retainer, and then disconnect the fuel tube connector from the injector.

HINT:

If the connector and injector are stuck, pinch the fuel tube connector by hand, and push and pull the connector to disconnect it.


NOTICE:

Do not use any tools in this procedure.



iii.
A203844

Check for foreign matter on the seal surface of the disconnected injector. Clean if necessary.


iv.
A203845C02
1.865,0.854 1.688,0.396 true 1.583,0.229 1.896,0.385 0.313,0.156 10 false *a
*a Plastic Bag


To protect the disconnected connector from damage and foreign matter, cover it with a plastic bag.



c.

Observe these precautions when connecting the fuel tube connector (for quick type A).

i.
A130944C02
2.385,1.26 2.698,1.417 0.313,0.156 10 false *a
*a Push


Check that there is no damage or contamination in the connection part of the pipe.


ii.

Align the axis of the connector with the axis of the pipe. Push the pipe into the connector until the connector makes a "click" sound. If the connection is tight, apply a small amount of fresh spindle oil or gasoline on the tip of the pipe.


iii.
A130945C02
2.198,1.448 2.51,1.604 0.313,0.156 10 false *a
*a Pull


After having finished the connection, try to pull apart the pipe and connector to confirm that they are securely connected.


iv.
A157616C02
0.865,0.792 1.177,0.948 0.313,0.156 10 false *a
*a Push


Attach the lock claw to the connector by pushing down on the cover as shown in the illustration.


v.

Check that there is no fuel leakage.



d.

Observe these precautions when connecting the fuel tube connector (for quick type B).

i.
A203842C04
1.906,3.313 1.906,3.99 true 1.667,2.583 1.906,2.865 false 2.688,2.698 2.521,2.969 false 2.26,3.479 2.406,3.875 true 1.531,2.417 1.844,2.573 0.313,0.156 10 false *a 2.635,2.521 2.948,2.677 0.313,0.156 10 false *b 1.854,3.99 2.167,4.146 0.313,0.156 10 false *c 2.375,3.875 2.688,4.031 0.313,0.156 10 false *d
*a Fuel Tube Connector
*b Injector
*c O-Ring
*d Retainer


Check for foreign matter on the injector and around the connector before connecting them. Clean if necessary.


ii.

Turn the retainer in the direction indicated by the arrow until makes a "click" sound.


iii.
A205168

After connecting the injector and connector, try to pull them apart to confirm that they are securely connected.


iv.

Check that there is no fuel leakage.



e.

Observe the following precautions when handling a nylon tube:

NOTICE:
·

Do not twist the connection part of the nylon tube when connecting it.

·

Do not bend or twist the nylon tube.

·

Do not remove the EPDM protector on the outside of the nylon tube.

·

Do not bend the nylon tube as this may cause blockage.





CHECK FOR FUEL LEAK


a.

Check that there are no fuel leaks after performing maintenance anywhere on the fuel system.

Click hereEngine / Hybrid System>1VD-FTV (FUEL)>FUEL SYSTEM(w/ DPF)>ON-VEHICLE INSPECTION