Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL TANK (for 130 L Tank) › 2016.08–2022.09
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135864 FUEL TANK(for 130 L Tank) A

1GR-FE FUEL  FUEL TANK(for 130 L Tank)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, watching time may be required before disconnecting the cable from the battery teminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2. DISCHARGE FUEL SYSTEM PRESSURE

Hide 3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 4.DRAIN FUEL

Hide 5.DISCONNECT FUEL MAIN HOSE

a.
A388278

Disconnect the fuel main hose from the fuel suction tube sub-assembly.

Click hereEngine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 6.DISCONNECT FUEL RETURN HOSE

a.
A388279

Slide the clamp and disconnect the fuel return hose from the fuel suction tube sub-assembly.


Hide 77213 7.DISCONNECT FUEL INLET HOSE

a.
A284618

Loosen the clamp and disconnect the fuel inlet hose from the fuel tank filler lower pipe sub-assembly.


Hide 77100D 8.DISCONNECT FUEL BREATHER HOSE

a.
A289093

Slide the clamp and disconnect the fuel breather hose from the fuel tank assembly.


Hide 77278A 9.DISCONNECT FUEL EVAPORATION HOSE

a.
A220474

Slide the clamp and disconnect the fuel evaporation hose from the No. 2 fuel main tube sub-assembly.


Hide 77100 10.REMOVE FUEL TANK ASSEMBLY

a.
A284619

Disconnect the fuel sender gauge connector.


b.

Disconnect the fuel pump connector.


c.
A290421

Detach the 2 wire harness clamps from the frame.


d.

Set an engine lifter underneath the fuel tank assembly.


e.
A284620

Remove the 2 bolts, 2 pins and 2 fuel tank bands.


f.

Slightly lower the engine lifter.


g.

Remove the No. 1 fuel tank protector sub-assembly.


Hide 77278A 11.REMOVE FUEL EVAPORATION HOSE

a.

Slide the clamp and remove the fuel evaporation hose from the fuel tank assembly.


Hide 77203B 13.REMOVE FUEL SUCTION TUBE SUB-ASSEMBLY

a.
A388280

Remove the nut.


b.

Remove the 7 screws and fuel suction tube sub-assembly from the fuel tank assembly.


c.

Remove the gasket from the fuel suction tube sub-assembly.


Hide 77011 14.REMOVE FUEL TANK FILLER LOWER PIPE SUB-ASSEMBLY

a.
A289045

Remove the 6 screws and fuel tank filler lower pipe sub-assembly from the fuel tank assembly.


b.

Remove the gasket from the fuel tank filler lower pipe sub-assembly.