Home › Engine / Hybrid System › 1VD-FTV (EMISSION CONTROL) › EGR VALVE (w/ DPF) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029525 1VD-FTV EMISSION CONTROL _0290813 EGR VALVE(w/ DPF) G

1VD-FTV EMISSION CONTROL  EGR VALVE(w/ DPF)  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

NOTICE:

Always stop the engine when installing or removing the vacuum pump, or when removing the vacuum hoses.


PROCEDURE

Hide 25630 1.INSPECT NO. 2 EGR VALVE ASSEMBLY

a.

Remove the vacuum hose of the No. 1 vacuum switching valve from the EGR cooler.


b.

Connect a vacuum pump to the No. 2 EGR valve assembly in the illustration.

A393146C01
6.375,5.417 6.521,4.76 6.521,4.76 6.646,4.76 false 2.24,5.802 2.375,5.802 2.375,5.802 3.271,5.135 true 6.698,4.677 7.01,4.833 0.313,0.156 10 false *a 1.99,5.729 2.229,5.938 0.24,0.208 10 false *1
*1 No. 1 Vacuum Switching Valve Assembly - -
*a Vacuum Pump - -



c.

After applying negative pressure using the vacuum pump, check that the valve of the No. 2 EGR valve assembly makes a "click" sound after it returns to its original position.

If the result is not as specified, refer to the No. 2 EGR valve assembly inspection procedures.

Click hereEngine / Hybrid System>1VD-FTV (EMISSION CONTROL)>EGR VALVE (w/ DPF)>INSPECTION