51442 1.REMOVE NO. 2 ENGINE UNDER COVER
2.DRAIN ENGINE COOLANT
53111 3.REMOVE RADIATOR GRILLE
16571C 4.REMOVE NO. 1 RADIATOR HOSE
Slide the 2 hose clamps and remove the No. 1 radiator hose.
17881 5.REMOVE NO. 1 AIR CLEANER HOSE
Loosen the 2 hose clamps and remove the No. 1 air cleaner hose.
17705 6.REMOVE AIR CLEANER CAP SUB-ASSEMBLY
7.REMOVE AIR CLEANER CASE SUB-ASSEMBLY
Remove the 2 bolts, nut and air cleaner case sub-assembly.
17805 8.REMOVE INTAKE AIR CONNECTOR SUB-ASSEMBLY
Disconnect the air flow meter connector.
Detach the 2 wire harness clamps to disconnect the wire harness from the intake air connector sub-assembly.
Loosen the hose clamp.
Remove the 2 bolts and intake air connector sub-assembly.
17875 9.REMOVE INTAKE AIR CONNECTOR PIPE
Disconnect the engine coolant temperature sensor connector.
Detach the wire harness clamp to disconnect the wire harness from the intake air connector pipe.
Slide the clip and disconnect the ventilation hose from the intake air connector pipe.
Loosen the hose clamp.
Remove the 2 bolts and intake air connector pipe.
16470 10.REMOVE RADIATOR RESERVOIR ASSEMBLY
Slide the hose clamp and disconnect the No. 1 water by-pass hose from the radiator assembly.
Slide the hose clamp and disconnect the No. 2 water by-pass hose from the water inlet.
Remove the 3 bolts and radiator reservoir assembly.
16711 11.REMOVE FAN SHROUD
Loosen the 4 nuts holding the fluid coupling fan.
Remove the fan and generator V belt.
Click hereEngine / Hybrid System>1VD-FTV (ENGINE MECHANICAL)>DRIVE BELT>REMOVAL
Remove the 3 bolts holding the fan shroud.
Remove the 4 nuts of the fluid coupling fan, and then remove the fan shroud together with the fluid coupling fan.
Do not allow the fluid coupling fan to interfere with other parts.
16371 12.REMOVE FAN PULLEY
Remove the fan pulley.
16361 13.REMOVE FAN
Remove the 4 nuts and fan from the fluid coupling assembly.
16572D 14.REMOVE NO. 2 RADIATOR HOSE
Slide the 2 hose clamps and remove the No. 2 radiator hose.
16400 15.REMOVE RADIATOR ASSEMBLY
Remove the 4 bolts and radiator assembly.
16584 16.REMOVE RADIATOR MOUNTING INSULATOR
| *1 | Radiator Mounting Insulator |
| *2 | Collar |
Remove the 2 collars and 2 radiator mounting insulators.