The procedures listed below are for the RH side.
Use the same procedures for the LH side and RH side.
55412D 1.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL
55413D 2.REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL
84988L 3.REMOVE VSC OFF SWITCH
|
Remove in this Direction |
Disconnect the VSC OFF switch connector.
Detach the 2 claws and remove the VSC OFF switch from the center lower instrument cluster finish panel.
84988M 4.REMOVE VSC OFF SWITCH BULB
Remove the VSC OFF switch bulb from the VSC OFF switch.