Home › Engine / Hybrid System › 1VD-FTV (ENGINE MECHANICAL) › REAR CRANKSHAFT OIL SEAL › from 2017.09
RM25T0E _51 Engine / Hybrid System _029207 1VD-FTV ENGINE MECHANICAL _0132954 REAR CRANKSHAFT OIL SEAL A

1VD-FTV ENGINE MECHANICAL  REAR CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11381A 1.INSTALL REAR CRANKSHAFT OIL SEAL

a.

Apply engine oil to the lip of a new rear crankshaft oil seal.


b.
A410205C01
1.229,0.688 1.708,0.885 1.708,0.885 1.938,0.885 false 1.313,3.094 1.656,3.094 true 1.188,1.365 1.698,1.365 false 1.958,0.771 2.271,0.927 0.313,0.156 10 false *1 1.719,1.25 2.031,1.406 0.313,0.156 10 false *2 1.583,0.313 1.896,0.469 0.313,0.156 10 false A 1,3.01 1.344,3.167 0.344,0.156 10 false SST
*1 Rear Engine Oil Seal Retainer
*2 Rear Crankshaft Oil Seal


Using SST and a hammer, tap in the rear crankshaft oil seal as shown in the illustration.

SST
09223-56010  

Standard depth A:

1.0 to 3.0 mm (0.0393 to 0.118 in.)


NOTICE:
·

Keep the lip free from foreign matter.

·

Do not tap on the rear crankshaft oil seal at an angle.

·

Make sure that the lip of the rear crankshaft oil seal is properly installed.




Hide 31250 3.INSTALL CLUTCH DISC ASSEMBLY

Hide 31210 4.INSTALL CLUTCH COVER ASSEMBLY