Use the same procedure for the RHD and LHD vehicles.
The procedures listed below is for the LHD vehicles.
73230 1.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
| *a | Front |
| *b | 90° |
Install the front seat inner belt assembly RH with the bolt.
Make sure that the floor anchor is installed as shown in the illustration.
w/ Seat Belt Warning System:
Connect the connector.
73240 2.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
| *a | Front |
| *b | 90° |
Install the front seat inner belt assembly LH with the bolt.
Make sure that the floor anchor is installed as shown in the illustration.
w/ Seat Belt Warning System:
Connect the connector.
58901A 3.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/ Console Box)
4.CHECK SEAT BELT WARNING SYSTEM (w/ Seat Belt Warning System)