Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH side.
The procedure listed below is for the LH side.
69120A 1.INSTALL FRONT DOOR LOCK ACTUATOR ASSEMBLY LH (w/ Power Door Lock, Type B)
Attach the guide in the direction indicated by the arrow in the illustration.
Install the front door lock actuator assembly LH to the front door lock assembly LH with the 2 screws.
69320 2.INSTALL FRONT DOOR LOCK ASSEMBLY LH
Apply MP grease to the sliding parts of the front door lock assembly LH.
Make sure that the front door lock open rod is securely connected to the front door lock assembly LH.
Using a T30 "TORX" socket wrench, install the front door lock assembly LH with the 3 screws.
Attach the 2 snaps and connect the 2 control links as shown in the illustration.
w/ Power Door Lock Type A:
Connect the connector and attach the clamp.
w/ Power Door Lock Type B:
Connect the connector and attach the clamp.
Install the bolt.
69310 3.INSTALL FRONT DOOR LOCK ASSEMBLY RH (w/ Double Inside Handles)
Apply MP grease to the sliding parts of the front door lock assembly RH.
Using a T30 "TORX" socket wrench, install the front door lock assembly RH with the 3 screws.
Attach the 2 snaps and connect the 2 control links as shown in the illustration.
w/ Power Door Lock:
Connect the connector.
Attach the clamp.
Install the bolt.
69604A 4.INSTALL FRONT DOOR LOCK REMOTE CONTROL ROD SUB-ASSEMBLY LH
69712A 5.INSTALL FRONT DOOR LOCK REMOTE CONTROL LINK LH
67404F 6.INSTALL FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY LH (for Canvas Top)
67404F 7.INSTALL FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY LH (except Canvas Top)
67042 8.INSTALL FRONT DOOR WINDOW FRAME SUB-ASSEMBLY LH (for Canvas Top)
68193C 9.INSTALL FRONT DOOR FRONT BELT SEAL LH (for Canvas Top)
67862 10.INSTALL FRONT DOOR WEATHERSTRIP LH (for Canvas Top)
69802 11.INSTALL FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY LH (w/ Power Window)
69802 12.INSTALL FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY LH (w/o Power Window)
68102 13.INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH (w/ Power Window)
68102 14.INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH (w/o Power Window)
68141 15.INSTALL FRONT DOOR GLASS RUN
68220A 16.INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP ASSEMBLY LH
67832 17.INSTALL FRONT DOOR SERVICE HOLE COVER LH
69205 18.INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY RH (w/ Double Inside Handles)
69759V 19.INSTALL FRONT DOOR LOCK LINK SILENCER
67602 20.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH (for Canvas Top)
67702 21.INSTALL FRONT DOOR TRIM COVER SUB-ASSEMBLY LH (for Canvas Top)
67602 22.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH (w/ Armrest)
23.INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side, w/ Power Window)
24.INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side, w/ Power Window)
69260 25.INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)
68278B 26.INSTALL DOOR INSIDE HANDLE BEZEL (w/ Double Inside Handles)
69206B 27.INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY
74640C 28.INSTALL DOOR ASSIST GRIP ASSEMBLY LH (w/ Assist Grip)
29.INSTALL HOLE PLUG (for Canvas Top)
30.CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
31. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
32.CHECK POWER WINDOW CONTROL SYSTEM (w/ Power Window)
33.CHECK POWER DOOR LOCK CONTROL SYSTEM (w/ Power Door Lock)