Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR BELT MOULDING › from 2022.09
RM25T0E _59 Vehicle Exterior _029942 EXTERIOR PANELS / TRIM _0137749 FRONT DOOR BELT MOULDING A

EXTERIOR PANELS / TRIM  FRONT DOOR BELT MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 68210C 1.INSTALL FRONT DOOR OUTER GLASS WEATHERSTRIP ASSEMBLY LH

a.

w/o Vent Window:

i.

Attach the 7 claws to install the front door outer glass weatherstrip assembly LH.



b.

w/ Vent Window:

i.

Attach the 5 claws to install the front door outer glass weatherstrip assembly LH.



c.

for Model Code #J76 Series, for Double Cab:

i.

Attach the 6 claws to install the front door outer glass weatherstrip assembly LH.



Hide 68102 2.INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH (w/ Power Window)

Hide 68102 3.INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH (w/o Power Window)

Hide 68141 4.INSTALL FRONT DOOR GLASS RUN

Hide 68220A 5.INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP ASSEMBLY LH

Hide 67832 6.INSTALL FRONT DOOR SERVICE HOLE COVER LH

Hide 69205 7.INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY RH (w/ Double Inside Handles)

Hide 69759V 8.INSTALL FRONT DOOR LOCK LINK SILENCER

Hide 67602 9.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH (w/ Armrest)

Hide 67602 10.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH (for Canvas Top)

Hide 67702 11.INSTALL FRONT DOOR TRIM COVER SUB-ASSEMBLY LH (for Canvas Top)

Hide 12.INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side, w/Power Window)

Hide 13.INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side, w/Power Window)

Hide 69260 14.INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)

Hide 68278B 15.INSTALL DOOR INSIDE HANDLE BEZEL (w/ Double Inside Handles)

Hide 69206B 16.INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY

Hide 74640C 17.INSTALL DOOR ASSIST GRIP ASSEMBLY LH (w/ Assist Grip)

Hide 18.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Power Window)

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)

Hide 19. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (w/ Power Window)

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART


Hide 20.CHECK POWER WINDOW CONTROL SYSTEM (w/ Power Window)