Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
68230C 1.INSTALL REAR DOOR OUTER GLASS WEATHERSTRIP ASSEMBLY LH
Attach the 6 claws to install the rear door outer glass weatherstrip assembly LH.
62714 2.INSTALL REAR QUARTER WINDOW GLASS LH
68240A 3.INSTALL REAR DOOR INNER GLASS WEATHERSTRIP ASSEMBLY LH
68104 4.INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH
67408E 5.INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY LH
68142 6.INSTALL REAR DOOR GLASS RUN
69718B 7.INSTALL REAR DOOR LOCK REMOTE CONTROL LINK LH
69780A 8.INSTALL REAR DOOR INSIDE LOCKING LINK ASSEMBLY LH
67842E 9.INSTALL REAR DOOR SERVICE HOLE COVER LH
69759J 10.INSTALL DOOR LOCK LINK SILENCER
67604 11.INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH (w/o Power Window)
74240 12.INSTALL REAR ARMREST ASSEMBLY LH (w/o Power Window)
74240 13.INSTALL REAR ARMREST ASSEMBLY LH (w/ Power Window)
67604 14.INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH (w/ Power Window)
15.INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL (w/ Power Window)
69260E 16.INSTALL REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)
69206C 17.INSTALL REAR DOOR INSIDE HANDLE SUB-ASSEMBLY LH
18.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Power Window)
19. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (w/ Power Window)
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
20.CHECK POWER WINDOW CONTROL SYSTEM (w/ Power Window)