55433B 1.INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
55550 2.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
3.INSTALL NETWORK GATEWAY ECU
|
Bolt |
|
Connector |
Attach the hook temporarily install the network gateway ECU.
Install the network gateway ECU with the bolt.
Connect the connector.
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART