11363A 1.INSTALL FLYWHEEL HOUSING SIDE COVER
Install the flywheel housing side cover to the cylinder block.
28100 2.INSTALL STARTER ASSEMBLY
Install the starter assembly to the cylinder block with the 2 bolts.
Install the starter cover to the starter assembly with the 3 bolts.
Connect the starter wire with the nut.
The direction of starter wire is indicated in the illustration.
Connect the terminal cap.
Connect the starter connector.
Connect the ground wire to the cylinder block with the bolt.
17105 3.INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART