Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING RECEIVER (for Pickup) › from 2022.09
RM25T0E _53 Suspension _062777 TIRE PRESSURE MONITORING _0310952 TIRE PRESSURE WARNING RECEIVER(for Pickup) A

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING RECEIVER(for Pickup)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 4.REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER

NOTICE:
·

Do not drop the tire pressure warning ECU and receiver, strike it with tools or subject it to impact.

·

If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.



a.
C370982

Remove the bolt.


b.

Detach the guide to remove the tire pressure warning ECU and receiver.


c.

Disconnect the connector from the tire pressure warning ECU and receiver.