1. DISCHARGE FUEL SYSTEM PRESSURE
2. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
23270 4.REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY
| *1 | Fuel Pressure Regulator Holder |
Remove the fuel pressure regulator holder from the fuel pressure pulsation damper assembly.
Pull the fuel pressure pulsation damper assembly out of the fuel delivery pipe sub-assembly.
Remove the O-ring from the fuel pressure pulsation damper assembly.