Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL TANK (for 90 L Tank Carried in Rear) › from 2022.09
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135863 FUEL TANK(for 90 L Tank Carried in Rear) A

1GR-FE FUEL  FUEL TANK(for 90 L Tank Carried in Rear)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2. DISCHARGE FUEL SYSTEM PRESSURE

Hide 3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 4.DRAIN FUEL

a.
A166819

Loosen the fuel tank drain plug and drain the fuel from the fuel tank assembly.


b.

Install a new gasket and the fuel tank drain plug to the fuel tank assembly.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


Hide 5.DISCONNECT FUEL MAIN HOSE

a.
A220473

Disconnect the fuel main hose from the fuel suction tube assembly.

Click hereEngine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 6.DISCONNECT FUEL RETURN HOSE

a.
A220708

Slide the clamp and disconnect the fuel return hose from the No. 2 fuel main tube.


Hide 77213 7.DISCONNECT FUEL INLET HOSE

a.
A220695

Loosen the clamp and disconnect the fuel inlet hose from the fuel tank inlet pipe sub-assembly.


Hide 77100D 8.DISCONNECT FUEL BREATHER HOSE

a.
A220788

Slide the clamp and disconnect the fuel breather hose from the fuel tank inlet pipe sub-assembly.


Hide 77278A 9.DISCONNECT FUEL EVAPORATION HOSE

a.
A220474

Slide the clamp and disconnect the fuel evaporation hose from the No. 2 fuel main tube.


Hide 77100 10.REMOVE FUEL TANK ASSEMBLY

a.
A293625

Disconnect the fuel sender gauge connector.


b.

Disconnect the fuel pump connector.


c.

Set an engine lifter underneath the fuel tank assembly.


d.
A166813

Remove the 2 bolts, 2 pins and disconnect the 2 fuel tank bands.


e.

Slightly lower the engine lifter.


f.

Remove the No. 1 fuel tank protector sub-assembly.


Hide 11.REMOVE FUEL HOSE

a.
A220475

Slide the clamp and remove the fuel return hose from the fuel suction tube sub-assembly.


b.
A220476

Slide the clamp and remove the fuel evaporation hose from the fuel tank assembly.


c.
A220477

Slide the clamp and remove the fuel breather hose from the fuel tank assembly.


d.

Loosen the clamp and remove the fuel inlet hose from the fuel tank filler lower pipe sub-assembly.


Hide 77203B 13.REMOVE FUEL SUCTION TUBE SUB-ASSEMBLY

a.
A220479

Remove the nut.


b.

Remove the 7 screws and fuel suction tube sub-assembly from the fuel tank assembly.


c.

Remove the gasket from the fuel suction tube sub-assembly.


Hide 77011 14.REMOVE FUEL TANK FILLER LOWER PIPE SUB-ASSEMBLY

a.
A220478

Remove the 6 screws and fuel tank filler lower pipe sub-assembly from the fuel tank assembly.


b.

Remove the gasket from the fuel tank filler lower pipe sub-assembly.