Home › Vehicle Interior › PRE-COLLISION › FRONT CAMERA › from 2022.09
RM25T0E _58 Vehicle Interior _128087 PRE-COLLISION _0564251 FRONT CAMERA A

PRE-COLLISION  FRONT CAMERA  INSTALLATION  


PROCEDURE

Hide 8646C 1.INSTALL FORWARD RECOGNITION CAMERA

NOTICE:
·

When replacing the forward recognition camera, replace it with a new one.

·

If the forward recognition camera has been struck or dropped, replace it with a new one.

·

If the forward recognition camera is not properly installed, forward recognition camera optical axis learning cannot be performed properly. Make sure the forward recognition camera is installed securely.

·

Do not touch the camera lens or the front windshield glass in front of the camera.

·

Replace the forward recognition camera if there is any foreign matter on the camera lens.

·

When replacing the forward recognition camera, do not dirty or damage the lens.

·

If the forward recognition camera bracket is deformed or damaged, replace it together with the windshield glass.

·

When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also, the front camera system or pre-collision system may not operate properly due to a difference in the transmissivity or black ceramic border.

·

If there is any foreign matter on the area of the windshield glass in front of the forward recognition camera, clean the windshield glass before installing the forward recognition camera. Install the hood with heater sub-assembly and forward recognition camera.

Forward recognition with heater hood sub-assembly removal: Click hereVehicle Interior>PRE-COLLISION>CAMERA HEATER>REMOVAL

Forward recognition with heater hood sub-assembly installation: Click hereVehicle Interior>PRE-COLLISION>CAMERA HEATER>INSTALLATION



a.
B650245C01
0,0 0,0 false
V113147

Install in this Direction


Attach the guide to install the forward recognition camera as shown in the illustration.

NOTICE:

Do not touch the camera lens.



b.

Connect the connector.


Hide 86464A 2.INSTALL FORWARD RECOGNITION LATCH

NOTICE:

Before installing the forward recognition latch, be sure to check that the forward recognition camera is securely installed.


a.
B650243C01
2.948,0.25 2.844,0.25 2.844,0.25 2.813,0.354 false 2.958,0.156 3.25,0.375 0.292,0.219 10 false *a
*a Securely attach the claw
V113147

Install in this Direction


Attach the guide and claw as shown in the illustration to install the forward recognition latch.

NOTICE:

Check that the forward recognition latch is securely installed.



Hide 86466D 3.INSTALL NO. 1 FORWARD RECOGNITION COVER

a.
B650241C01
0,0 0,0 false
V113147

Install in this Direction


Attach the guide and clip as shown in the illustration to install the No. 1 forward recognition cover.

NOTICE:

When installing, press the cover parallel to the windshield glass surface and install.


HINT:

Check the locking sound of the clip when attaching it.



Hide 8646C 4.ADJUST FORWARD RECOGNITION CAMERA

a.

If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform Forward Recognition Camera Learning.

HINT:

Forward Recognition Camera Learning can be performed by using either Target Adjustment (One Time Recognition) or Target Adjustment (Sequential Recognition) or Driving Adjustment.