27020 1.INSTALL GENERATOR ASSEMBLY
Install the generator assembly with the 2 bolts.
Connect the wire harness.
Install the 2 wire harness clamp brackets with the 2 bolts.
Attach the clamp.
Connect the wire to terminal B and install the nut.
Install the terminal cap.
Connect the connector to the generator assembly.
12216C 2.INSTALL OIL BAFFLE PLATE
Install the oil baffle plate with the bolt.
16361A 3.INSTALL FAN AND GENERATOR V BELT
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART