Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING (for Double Cab) › from 2022.09
RM25T0E _58 Vehicle Interior _029934 INTERIOR PANELS / TRIM _0142495 ROOF HEADLINING(for Double Cab) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for Double Cab)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 63311A 1.INSTALL NO. 1 ROOF HEADLINING

a.
B327806

Place the No. 1 roof headlining into the vehicle through the front door.

NOTICE:
·

Check that the corners of the No. 1 roof headlining are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.

·

Make sure that the No. 1 roof headlining does not get caught on anything as it may become bent or damaged.

·

Do not damage the No. 1 roof headlining or vehicle interior.




b.
B327805

Install the roof headlining assembly with the 5 clips.


c.

w/ Pre-collision System:

i.
B666269

Connect the 2 connectors.



Hide 63388G 2.INSTALL NO. 2 ROOF HEADLINING HOLDER COVER (w/ Pre-collision System)

a.
B666270

Attach the guide and claw to install the No. 2 roof headlining holder cover.


Hide 86466D 3.INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)

Hide 87810 4.INSTALL INNER REAR VIEW MIRROR ASSEMBLY

Hide 87834 5.INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER

Hide 87827 6.INSTALL INNER REAR VIEW MIRROR ABSORBER

Hide 74348 7.INSTALL VISOR HOLDER

HINT:

Use the same procedure for both visor holders.


a.

Attach the clip to install the visor holder.


b.

Install the screw.


Hide 74320 8.INSTALL VISOR ASSEMBLY LH

a.

Install the visor assembly LH with the 2 screws.


Hide 74310 9.INSTALL VISOR ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 63312A 10.INSTALL NO. 2 ROOF HEADLINING

a.
B327807

Place the No. 2 roof headlining into the vehicle through the rear door.

NOTICE:
·

Check that the corners of the No. 2 roof headlining are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.

·

Make sure that the No. 2 roof headlining does not get caught on anything as it may become bent or damaged.

·

Do not damage the No. 2 roof headlining or vehicle interior.




b.
B327804

Install the No. 2 roof headlining with the 6 clips.


Hide 81240 11.INSTALL NO. 1 ROOM LIGHT ASSEMBLY

Hide 81241 12.INSTALL NO. 1 ROOM LIGHT LENS

Hide 74620B 13.INSTALL REAR ASSIST GRIP ASSEMBLY

HINT:

Use the same procedure for both rear assist grip assemblies.


a.

for Type A:

Install the rear assist grip assembly with the 2 screws.


b.

for Type B:

Using a T25 "TORX" socket wrench, install the rear assist grip assembly with the 2 screws.


Hide 74610A 14.INSTALL ASSIST GRIP SUB-ASSEMBLY

a.

for Type A:

Install the assist grip sub-assembly with the 2 screws.


b.

for Type B:

Using a T25 "TORX" socket wrench, install the assist grip sub-assembly with the 2 screws.


Hide 74617C 15.INSTALL ASSIST GRIP PLUG

HINT:

Use the same procedure for all assist grip plugs.


a.

Attach the 2 claws to install the assist grip plug.


Hide 62639A 16.INSTALL QUARTER PILLAR GARNISH LH

a.
B327803

Attach the 4 clips to install the quarter pillar garnish LH.


b.

Install the 2 clips.


c.
B386399C01
1.917,1.042 2.531,0.667 false 2.563,0.531 2.875,0.688 0.313,0.156 10 false *1
*1 Protective Tape


Using a screwdriver, insert the back window glass weatherstrip into the quarter pillar garnish LH.

HINT:

Tape the screwdriver tip before use.



d.

Connect the rear seat belt shoulder anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


e.

Attach the 2 claws to close the rear seat belt shoulder anchor cover.


Hide 62638A 17.INSTALL QUARTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 62412 18.INSTALL CENTER PILLAR GARNISH LH

a.

Attach the 3 guides and clip to install the center pillar garnish LH.


b.

Connect the front seat belt shoulder anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


c.

Attach the 2 claws to close the front seat belt shoulder anchor cover.


Hide 62411 19.INSTALL CENTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 74630E 20.INSTALL REAR ASSIST GRIP ASSEMBLY LH

a.

Install the rear assist grip assembly LH with the 2 screws.


b.

for Type B:

Using a T25 "TORX" socket wrench, install the rear assist grip assembly LH with the 2 screws.


Hide 74620C 21.INSTALL REAR ASSIST GRIP ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 62212 22.INSTALL FRONT PILLAR GARNISH LH

a.

Attach the clip and claw to install the front pillar garnish LH.


Hide 62211 23.INSTALL FRONT PILLAR GARNISH RH

a.

Attach the clip and claw to install the front pillar garnish RH.


b.

w/o Assist Grip:

Install the 2 clips.


Hide 74603 24.INSTALL FRONT ASSIST GRIP SUB-ASSEMBLY

HINT:

Use the same procedure for both front assist grip sub-assemblies.


a.

for Type A:

Install the front assist grip sub-assembly with the 2 screws.


b.

for Type B:

Using a T25 "TORX" socket wrench, install the front assist grip sub-assembly with the 2 screws.


Hide 74617A 25.INSTALL ASSIST GRIP PLUG

HINT:

Use the same procedure for all assist grip plugs.


a.

Attach the 2 claws to install the assist grip plug.


Hide 55356B 26.INSTALL INSTRUMENT PANEL PLATE LH

Hide 55355B 27.INSTALL INSTRUMENT PANEL PLATE RH

Hide 62332C 28.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

a.

Install the rear door opening trim weatherstrip LH.


Hide 62331C 29.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 62316C 30.INSTALL FRONT DOOR REAR OPENING TRIM WEATHERSTRIP LH

a.

Install the front door rear opening trim weatherstrip LH.


Hide 62315E 31.INSTALL FRONT DOOR REAR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 62414A 32.INSTALL LOWER CENTER PILLAR GARNISH LH

a.

Put protective tape around the lower center pillar garnish LH.


b.

Insert the bottom of the lower center pillar garnish LH.


c.

Attach one side of the lower center pillar garnish LH.


d.

Using a clip remover, attach the other side of the lower center pillar garnish LH as shown in the illustration to install the lower center pillar garnish LH.

HINT:

Tape the clip remover tip before use.


B386398C01
2.156,1.427 2.479,1.01 true 1.198,1.708 1.854,1.792 true 1.021,1.604 1.333,1.76 0.313,0.156 10 false *1 2.448,0.854 2.76,1.01 0.313,0.156 10 false *1
*1 Protective Tape - -



Hide 62413A 33.INSTALL LOWER CENTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 62112A 34.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

a.

Attach the clip to install the cowl side trim sub-assembly LH.


b.

Install the cap nut.


Hide 62111A 35.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 67918A 36.INSTALL REAR DOOR SCUFF PLATE LH

a.
B386396

Attach the 2 clips to install the rear door scuff plate LH.


Hide 67917A 37.INSTALL REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 67914 38.INSTALL FRONT DOOR SCUFF PLATE LH

a.
B386397

Attach the 4 clips to install the front door scuff plate LH.


Hide 67913 39.INSTALL FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.