Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING (for Semi-long Body) › from 2022.09
RM25T0E _58 Vehicle Interior _029934 INTERIOR PANELS / TRIM _0142493 ROOF HEADLINING(for Semi-long Body) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for Semi-long Body)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 63310 1.INSTALL ROOF HEADLINING ASSEMBLY

a.
B234863

Place the roof headlining assembly into the vehicle through the back door.

NOTICE:
·

Check that the corners of the roof headlining assembly are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.

·

Make sure that the roof headlining assembly does not get caught on anything as it may become bent or damaged.

·

Do not damage the roof headlining assembly or vehicle interior.




b.
B384975

Install the roof headlining assembly with the 11 clips.


c.
B235634

Install the upper part of the quarter window glass weatherstrip.

HINT:

Use the same procedure for the other quarter window glass weatherstrip.



d.

w/ Pre-collision System:

i.
B666269

Connect the 2 connectors.



Hide 81240 2.INSTALL NO. 1 ROOM LIGHT ASSEMBLY

Hide 81241 3.INSTALL NO. 1 ROOM LIGHT LENS

Hide 81240D 4.INSTALL NO. 2 ROOM LIGHT ASSEMBLY

Hide 81241A 5.INSTALL NO. 2 ROOM LIGHT LENS

Hide 63388G 6.INSTALL NO. 2 ROOF HEADLINING HOLDER COVER (w/ Pre-collision System)

a.
B666270

Attach the guide and claw to install the No. 2 roof headlining holder cover.


Hide 86466D 7.INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)

Hide 87810 8.INSTALL INNER REAR VIEW MIRROR ASSEMBLY

Hide 87834 9.INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER

Hide 87827 10.INSTALL INNER REAR VIEW MIRROR ABSORBER

Hide 74348 11.INSTALL VISOR HOLDER

HINT:

Use the same procedure for both visor holders.


a.

Attach the clip to install the visor holder.


b.

Install the screw.


Hide 74320 12.INSTALL VISOR ASSEMBLY LH

a.

Install the visor assembly LH with the 2 screws.


Hide 74310 13.INSTALL VISOR ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 74620B 14.INSTALL REAR ASSIST GRIP ASSEMBLY

HINT:

Use the same procedure for both rear assist grip assemblies.


a.

for Type A:

Install the rear assist grip assembly with the 2 screws.


b.

for Type B:

Using a T25 "TORX" socket wrench, install the rear assist grip assembly with the 2 screws.


Hide 74610A 15.INSTALL ASSIST GRIP SUB-ASSEMBLY

a.

for Type A:

Install the assist grip sub-assembly with the 2 screws.


b.

for Type B:

Using a T25 "TORX" socket wrench, install the assist grip sub-assembly with the 2 screws.


Hide 74617C 16.INSTALL ASSIST GRIP PLUG

HINT:

Use the same procedure for all assist grip plugs.


a.

Attach the 2 claws to install the assist grip plug.


Hide 64805 17.INSTALL BACK DOOR OPENING TRIM SUB-ASSEMBLY

a.

Install the back door opening trim sub-assembly.


Hide 58573A 18.INSTALL REAR FLOOR MAT SUPPORT PLATE

a.

Install the rear floor mat support plate with the 4 screws.


Hide 62639A 19.INSTALL QUARTER PILLAR GARNISH LH

a.

Attach the 2 guides and 7 clips to install the quarter pillar garnish LH.


b.

Connect the rear seat belt shoulder anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


c.

Attach the 2 claws to close the rear seat belt shoulder anchor cover.


Hide 62638A 20.INSTALL QUARTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 62412 21.INSTALL CENTER PILLAR GARNISH LH

a.

Attach the 3 guides and clip to install the center pillar garnish LH.


b.

Connect the front seat belt shoulder anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


c.

Attach the 2 claws to close the front seat belt shoulder anchor cover.


Hide 62411 22.INSTALL CENTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 74630E 23.INSTALL REAR ASSIST GRIP ASSEMBLY LH

a.

for Type A:

Install the rear assist grip assembly LH with the 2 screws.


b.

for Type B:

Using a T25 "TORX" socket wrench, install the rear assist grip assembly LH with the 2 screws.


Hide 74620C 24.INSTALL REAR ASSIST GRIP ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 62212 25.INSTALL FRONT PILLAR GARNISH LH

a.

Attach the clip and claw to install the front pillar garnish LH.


Hide 62211 26.INSTALL FRONT PILLAR GARNISH RH

a.

Attach the clip and claw to install the front pillar garnish RH.


b.

w/o Assist Grip:

Install the 2 clips.


Hide 74603 27.INSTALL FRONT ASSIST GRIP SUB-ASSEMBLY

HINT:

Use the same procedure for both front assist grip sub-assemblies.


a.

for Type A:

Install the front assist grip sub-assembly with the 2 screws.


b.

for Type B:

Using a T25 "TORX" socket wrench, install the assist grip sub-assembly with the 2 screws.


Hide 74617A 28.INSTALL ASSIST GRIP PLUG

HINT:

Use the same procedure for all assist grip plugs.


a.

Attach the 2 claws to install the assist grip plug.


Hide 55356B 29.INSTALL INSTRUMENT PANEL PLATE LH

Hide 55355B 30.INSTALL INSTRUMENT PANEL PLATE RH

Hide 62332C 31.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

a.

Install the rear door opening trim weatherstrip LH.


Hide 62331C 32.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 62316C 33.INSTALL FRONT DOOR REAR OPENING TRIM WEATHERSTRIP LH

a.

Install the front door rear opening trim weatherstrip LH.


Hide 62315E 34.INSTALL FRONT DOOR REAR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 62414A 35.INSTALL LOWER CENTER PILLAR GARNISH LH

a.

Put protective tape around the lower center pillar garnish LH.


b.

Insert the bottom of the lower center pillar garnish LH.


c.

Attach one side of the lower center pillar garnish LH.


d.

Using a clip remover, attach the other side of the lower center pillar garnish LH as shown in the illustration to install the lower center pillar garnish LH.

HINT:

Tape the clip remover tip before use.


B386398C01
2.156,1.427 2.479,1.01 true 1.198,1.708 1.854,1.792 true 1.021,1.604 1.333,1.76 0.313,0.156 10 false *1 2.448,0.854 2.76,1.01 0.313,0.156 10 false *1
*1 Protective Tape - -



Hide 62413A 36.INSTALL LOWER CENTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 62112A 37.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

a.

Attach the clip to install the cowl side trim sub-assembly LH.


b.

Install the cap nut.


Hide 62111A 38.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 67918A 39.INSTALL REAR DOOR SCUFF PLATE LH

a.
B386396

Attach the 2 clips to install the rear door scuff plate LH.


Hide 67917A 40.INSTALL REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 67914 41.INSTALL FRONT DOOR SCUFF PLATE LH

a.
B386397

Attach the 4 clips to install the front door scuff plate LH.


Hide 67913 42.INSTALL FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.