Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL PRESSURE REGULATOR › from 2022.09
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135857 FUEL PRESSURE REGULATOR A

1GR-FE FUEL  FUEL PRESSURE REGULATOR  INSTALLATION  


PROCEDURE

Hide 23280 1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

a.

Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure regulator assembly.


b.

Install the fuel pressure regulator assembly with the 2 bolts to the fuel delivery pipe sub-assembly.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


c.

Connect the vacuum hose to the fuel pressure regulator assembly.


Hide 23802B 2.CONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 4. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART