23250 1.INSTALL FUEL INJECTOR ASSEMBLY
| *1 | O-Ring |
| *2 | Fuel Vibration Insulator |
Install a new fuel vibration insulator to each fuel injector assembly.
Apply a light coat of spindle oil or gasoline to new O-rings and install one to each fuel injector assembly.
Install the 6 fuel injector assemblies.
While turning each fuel injector assembly left and right, install it to the fuel delivery pipe sub-assembly.
Position the fuel injector connectors so they are facing outward.
23807 2.INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY
Place the fuel delivery pipe sub-assembly together with the 6 fuel injector assemblies on the intake manifold.
Temporarily install the 6 bolts, which are used to hold the fuel delivery pipe sub-assembly to the intake manifold.
Check that the fuel injector assemblies rotate smoothly.
If any fuel injector assembly does not rotate smoothly, replace the O-ring of that fuel injector assembly.
Position the fuel injector assemblies so that the connectors are facing outward.
Tighten the 6 bolts, which are used to hold the fuel delivery pipe sub-assembly to the intake manifold.
Connect the 6 fuel injector connectors to the fuel injector assemblies.
23802B 3.CONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY
Connect the No. 2 fuel pipe sub-assembly to the fuel pressure regulator assembly.
Click hereEngine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION
23801P 4.CONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY
Connect the No. 1 fuel pipe sub-assembly to the fuel delivery pipe sub-assembly.
Click hereEngine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION
17129 5.INSTALL INTAKE AIR SURGE TANK
6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
8.INSPECT FOR FUEL LEAK