Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL TANK (for 90 L Tank Carried in Rear) › from 2022.09
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135863 FUEL TANK(for 90 L Tank Carried in Rear) A

1GR-FE FUEL  FUEL TANK(for 90 L Tank Carried in Rear)  INSTALLATION  


PROCEDURE

Hide 77011 1.INSTALL FUEL TANK FILLER LOWER PIPE SUB-ASSEMBLY

a.

Install a new gasket to the fuel tank filler lower pipe sub-assembly.


b.

Install the fuel tank filler lower pipe sub-assembly with the 6 screws to the fuel tank assembly.


Hide 77203B 2.INSTALL FUEL SUCTION TUBE SUB-ASSEMBLY

a.

Install a new gasket to the fuel suction tube sub-assembly.


b.

Install the fuel suction tube sub-assembly with the 7 screws to the fuel tank assembly.


c.

Install the nut.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 4.INSTALL FUEL HOSE

a.

Install the fuel inlet hose to the fuel tank filler lower pipe sub-assembly and tighten the clamp to secure the hose.


b.

Install the fuel breather hose to the fuel tank assembly and slide the clamp to secure the hose.


c.

Install the fuel evaporation hose to the fuel tank assembly and slide the clamp to secure the hose.


d.

Install the fuel return hose to the fuel suction tube sub-assembly and slide the clamp to secure the hose.


Hide 77100 5.INSTALL FUEL TANK ASSEMBLY

a.

Set the fuel tank assembly and No. 1 fuel tank protector sub-assembly on an engine lifter.


b.

Raise the engine lifter.


c.

Install the 2 fuel tank bands with the 2 pins.


d.

Connect the 2 fuel tank bands with the 2 bolts.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)


e.

Connect the fuel sender gauge connector.


f.

Connect the fuel pump connector.


Hide 77278A 6.CONNECT FUEL EVAPORATION HOSE

a.

Connect the fuel evaporation hose to the No. 2 fuel main tube and slide the clamp to secure the hose.


Hide 77100D 7.CONNECT FUEL BREATHER HOSE

a.

Connect the fuel breather hose to the fuel tank inlet pipe sub-assembly and slide the clamp to secure the hose.


Hide 77213 8.CONNECT FUEL INLET HOSE

a.

Connect the fuel inlet hose to the fuel tank inlet pipe sub-assembly and tighten the clamp to secure the hose.


Hide 9.CONNECT FUEL RETURN HOSE

a.

Connect the fuel return hose to the No. 2 fuel main tube and slide the clamp to secure the hose.


Hide 10.CONNECT FUEL MAIN HOSE

a.

Connect the fuel main hose to the fuel suction tube sub-assembly.

Click hereEngine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 11.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 12. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART