| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | P POSITION SWITCH (PARKING SWITCH) | 84710A | - | - | - |
| 2 | NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY | - | ( )
|
- | - |
| 3 | INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY | 55470 | - | - | - |
| *A | for LHD | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | P POSITION SWITCH (PARKING SWITCH) | 84710A | - | - | - |
| 2 | NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY | - | ( )
|
- | - |
| 3 | INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY | 55470 | - | - | - |
| *A | for RHD | - | - |
84710A
1.INSTALL P POSITION SWITCH (PARKING SWITCH)
2.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
| *A | for LHD | *B | for RHD |
| *a | Blade | *b | Cutout |
Align the blades of the No. 3 instrument panel register assembly with the instrument cluster finish panel garnish assembly cutout position as shown in the illustration.
Attach the 7 claws, and install the No. 3 instrument panel register assembly to the instrument cluster finish panel garnish assembly.
Do not damage the claws.
55470
3.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY