Home › General › MAINTENANCE › FRONT WIPER RUBBER
RM37H0E _V1 General _095083 MAINTENANCE _0447959 FRONT WIPER RUBBER A

MAINTENANCE  FRONT WIPER RUBBER  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
B601320C01
1.49,3.51 1.656,3.51 1.656,3.51 2,3.823 false 5.219,4.823 5.469,4.604 5.469,4.604 5.635,4.604 false 2.708,5.167 2.875,5.167 2.875,5.167 3.229,4.833 false 6.417,0.24 6.75,0.24 false 3.688,1.875 3.854,1.875 3.854,1.875 4.313,1.458 false 3.406,1.719 3.688,2.073 0.281,0.354 18 false 2 1.24,3.365 1.521,3.719 0.281,0.354 18 false 3 5.719,4.51 6.083,4.906 0.365,0.396 10 false *1 2.458,5.073 2.823,5.469 0.365,0.396 10 false *1 6.156,0.094 6.438,0.448 0.281,0.354 18 false 1

Procedure Part Name Code
Z101186

Z101188

Z101187

1 TRANSITIONAL SERVICE POSITION - - - (Click here)
2 FRONT WIPER BLADE LH 85222A (Click here) - -
3 WIPER RUBBER LH 85214B - - -

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1. TRANSITIONAL SERVICE POSITION

HINT:

A full-concealed wiper is used for the front wiper. As a result, it is necessary to first move the front wiper arm to the service position before performing front wiper blade replacement.


a.

With the ignition switch on (IG), turn the ignition switch off.


b.

Within 45 seconds of turning the ignition switch off, operate and hold the windshield wiper switch assembly MIST function for 2 seconds.


c.

Check that the front wiper stops in the upper reverse position.


Hide 85222A 2.REMOVE FRONT WIPER BLADE LH

a.
B601324C01
1.271,1.271 1.563,0.76 true 3.51,1.188 3.802,0.823 true 5.531,0.885 6.198,0.698 true 4.938,2.094 5.323,1.688 true 6.26,0.604 6.573,0.76 0.313,0.156 10 false *1 4.813,2.115 5.125,2.271 0.313,0.156 10 false *2 3.844,0.688 4.156,0.844 0.313,0.156 10 false *a 1.635,0.646 1.875,0.813 0.24,0.167 10 false *a
*1 Front Wiper Arm LH *2 Front Wiper Blade LH
*a Holder - -


Flip up the front wiper blade LH holder and remove the front wiper blade LH as shown in the illustration.

NOTICE:
·

Make sure to hold the front wiper arm LH when locking it back.

·

If only the front wiper blade LH is lifted up, the front wiper blade may be deformed.

·

Slip a cloth between the windshield glass and the front wiper arm LH in order not to damage the windshield glass.




Hide 85214B 3.REMOVE WIPER RUBBER LH

a.
B601325N02
0.208,0.063 0.49,0.417 0.281,0.354 18 false i 3.917,0.083 4.198,0.438 0.281,0.354 18 false ii

i.

Pull in the direction of the arrow shown in the illustration and remove the wiper rubber LH together with the 2 front wiper rubber backing plates from the front wiper blade LH.


ii.

Remove the 2 front wiper rubber backing plates from the wiper rubber LH.