| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | MAP LIGHT ASSEMBLY | 81260A | ( )
|
- | - |
| 2 | THEFT WARNING ULTRASONIC SENSOR | 89732A | - | - | - |
| *A | w/ Intrusion Sensor Cancel Switch | - | - |
81260A
1.REMOVE MAP LIGHT ASSEMBLY
Using moulding remover D, detach the clip.
Detach the guide and remove the map light assembly.
Disconnect the 2 connectors.
89732A
2.REMOVE THEFT WARNING ULTRASONIC SENSOR (w/ Intrusion Sensor Cancel Switch)