If a EV control ECU that is incompatible with the immobiliser function is installed, the EV control ECU will store this DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|
| B279C95 | Engine Immobiliser System Incorrect Assembly | A EV control ECU that is incompatible with the immobiliser function is installed (1-trip detection logic*). | EV control ECU | EV | A | - |
*: Only detected while a malfunction is present.
| Vehicle Condition when Malfunction Detected | Fail-safe Function when Malfunction Detected |
|---|---|
| Hybrid control system cannot be started | - |
| DTC No. | Data List and Active Test |
|---|---|
| B279C95 | - |
Before replacing the EV control ECU, refer to the Service Bulletin.
Replace the EV control ECU with a new one.
Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID VEHICLE CONTROL ECU>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT