Home › Vehicle Exterior › DOOR / HATCH › FRONT DOOR OPENING TRIM WEATHERSTRIP
RM37H0E _59 Vehicle Exterior _095314 DOOR / HATCH _0452986 FRONT DOOR OPENING TRIM WEATHERSTRIP A

DOOR / HATCH  FRONT DOOR OPENING TRIM WEATHERSTRIP  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
B609001N01
2.563,2.573 3.135,2.573 false 3.688,4.708 4.042,4.708 false 2.344,2.427 2.625,2.781 0.281,0.354 18 false 1 4.083,4.542 4.365,4.896 0.281,0.354 18 false 2

Procedure Part Name Code
Z101186

Z101188

Z101187

1 FRONT DOOR OPENING TRIM WEATHERSTRIP 62312B (Click here) - -
2 FRONT DOOR SCUFF PLATE 67914B - - -

CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 62312B 1.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

a.
B627316C01
3.271,0.125 3.052,0.229 true 3.698,0.74 3.5,1.01 true 3.323,0.052 3.635,0.208 0.313,0.156 10 false *a 3.271,0.99 3.469,1.167 0.198,0.177 10 true *b 2.344,0.021 2.625,0.375 0.281,0.354 18 false i
*a Paint Mark *b Paint Mark Position


i.

Align the paint mark on a new front door opening trim weatherstrip with the marking position on the body and install the front door opening trim weatherstrip.

NOTICE:
·

Always align the paint mark when installing the part. If the paint mark position is out of place, water leaks may occur.

·

After installing, check that the corners are properly installed.



HINT:

To easily install the weatherstrip, first install the area with the paint mark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.

Paint Mark:
Location Color
RH Side Yellow Green
LH Side Blue




Hide 67914B 2.INSTALL FRONT DOOR SCUFF PLATE